Republic offers a complete line of standard masonry (ME Series) and drywall (MH Series) frames to fit any of your architectural needs. ME Series Universal Frames and MH Series Drywall Frames are constructed to conform to Steel Door Institute Standard ANSI A250.8-1998 (SDI-100). ME Series shall be formed from 16, 14, or 12 gauge cold-rolled steel or galvanealed steel. MH Series Frames are formed from 16 or 14 gauge cold-rolled steel or galvanealed steel. (14 gage maximum height of 8’0″). Frames may be either knocked-down or have corners welded and ground smooth. All frames have aligning tabs and slots for secure and easy interlocking of jambs to head. Frames are provided with 9/32″ DIA. silencer preparation, (3) per strike jamb and (2) per head for double openings for field application after finish painting. Frames for 1 3/4″ (44) doors have 9 gage steel universal hinge tap plates projection welded with provisions for 4 1/2″ (114) template type hinges and 14 gage steel strike reinforcement plate, extruded and formed to the equivalent of 10 gauge, projection welded with provision for a Universal ANSI A115.1 or ANSI A115.2 strike. Frames for 1 3/8″ (35) doors have 11 gage steel hinge reinforcement plates projection welded with provisions for 3 1/2″ (89) template type hinges and 14 gage steel strike reinforcement plate projection welded with provision for cylindrical ANSI A115.2 strike.
MH Series Drywall Frames
Republic offers a complete line of flush drywall frames available in 16 & 14 gauge cold-rolled or A60 galvanealed steel. Frames are knock-down construction and are designed to be installed on standard and non-standard wall sizes over pre-finished or unfinished drywall.
Republic MH series steel frames are available for either 1-3/8″ or 1-3/4″ thick doors. They have precision mitered corners providing a smooth attractive design and are designed to install in less than 10 minutes.
REPUBLIC “STOCK” PROFILES:
All Republic MH series drywall frames come with adjustable compression anchors in each jamb along with two high strength sill anchors made of hardened spring steel. These anchors provide a tight rigid fit in the opening.
- Compression Anchor
- Snap in Sill Anchors
TYPICAL WALL CONSTRUCTION:
- Unequal Rabbet Frame
- Single Rabbet Frame
For more information please visit Windsor Republic’s Website