//Bootstrap Type H/B Phenolic - Jammer Doors

Commercial Products    

Type H/B Phenolic


 
For a low-cost, easy installation, our Headrail-braced style is one of the best choices you can make. This popular type of installation requires no special floor construction, making it ideal for either new or existing buildings. Featuring a combined floor anchoring system and a tough, anti-grip aluminum headrail, this option makes for an incredibly secure installation with minimal difficulty.
 

Type H/B Powder-Coated Steel

COMPOSITION / CONSTRUCTION OF MATERIALS:
Doors: are 1” thick, constructed with two 22-gauge sheets of stretcher leveled, commercial quality electro-galvanized steel that are formed and then laminated under pressure to a sound deadening double-faced honeycomb core. Face plates are welded together at intervals of 18” on center around entire perimeter to insure a rigid one-piece unit. All edges are then interlocked with a continuous roll-formed edge molding. All mitered corners are welded and ground smooth. Corner clips will not be acceptable.
Panels: are 1” thick, constructed with two 22-gauge sheets of stretcher leveled, commercial quality electro-galvanized steel that are formed and then laminated under pressure to a sound deadening double-faced honeycomb core. Face plates are welded together at intervals of 18” on center around entire perimeter to insure a rigid one-piece unit. All edges are then interlocked with a continuous roll-formed edge molding. All mitered corners are welded and ground smooth. Corner clips will not be acceptable.
Type H/B–Headrail Braced Pilasters: are 1-1/4” thick, constructed with two 20-gauge sheets of commercial quality electro-galvanized steel that are formed and then laminated under pressure to a sound deadening double-faced honeycomb core. Face plates are welded together at intervals of 18” on center around entire perimeter to insure a rigid
For a low-cost, easy installation, our Headrail-braced style is one of the best choices you can make. This popular type of installation requires no special floor construction, making it ideal for either new or existing buildings. Featuring a combined floor anchoring system and a tough, anti-grip aluminum headrail, this option makes for an incredibly secure installation with minimal difficulty.
 

Type H/B Phenolic

COMPOSITION OF MATERIALS:
Doors, Panels and Pilasters shall be constructed of Solid Phenolic Core, comprised of melamineimpregnated decorative surface papers superimposed over a varying number of melamine-impregnated kraft paper sheets to achieve the desired thickness of each component. All sheets are fused together under high temperature and pressure to form a single solid sheet. Decorative surface papers are applied and bonded to meet and exceed NEMA standards.

 

CONSTRUCTION:

  • Doors: are 3/4” thick with decorative surface face sheets and black (core) edges.
  • Panels: are 1/2” thick with decorative surface face sheets and black (core) edges.
  • Pilasters (Type H/B–Headrail Braced): are 3/4” thick with decorative surface face sheets and black (core) edges. A polished 3” high stainless steel shoe shall be supplied to conceal floor anchoring. Pilaster tops are securely braced together with a continuous anti-grip headrail of extruded aluminum alloy, polished and clear anodized.
  • Finish: All component edges shall be machined, with all sharp edges removed.
  • Color: Shall be selected from AAMCO’s standard range of color offerings.
  • Hardware & Fittings: All door hinges, latch, strike/keeper and brackets shall be thru-bolted with sex bolts having theft resistant heads. Appropriate screws and anchors supplied for all other hardware and fittings. All fastenings shall be polished stainless steel.

 

DOORS:

  • Upper and lower door hinge brackets are surface mounted, heavy-duty stainless steel with a polished finish. Door is self-closing and operates on opposing stainless steel cams that are fully recessed and concealed within the hinge bracket housing. Gravity activated hinge is adjustable for various degree of openings when door is in resting position.
  • Surface mounted slide latch assembly is heavy-duty cast stainless steel.
  • Door strike and keeper is heavy-duty cast stainless steel. One-piece design has a wrap-around flange that fits over pilaster edge for maximum durability.
  • Combination coat hook and bumper is cast stainless steel.

 

WALL & PILASTER BRACKETS:

Shall be heavy-duty stainless steel castings. The wall anchored pilasters and dividing partition panels shall be attached with two brackets of either double ear or single ear design depending on existing wall condition. Dividing partition panels shall be attached to the “rear” pilaster face with two “U” brackets.
 

INSTALLATION:

Shall be in accordance with AAMCO’s approved shop drawing and installation instructions with partitions being rigid, plumb, straight and level. Unless stated otherwise, doors and panels are 58” high and mounted 12” above finished floor. Pilasters shall measure 82” from floor to top of headrail.
 

WARRANTY:

AAMCO provides for all solid phenolic core materials, when properly maintained, a ten-year warranty against all defects in workmanship and construction under normal wear and use of this product.
 
For more information please visit All American Metal’s Website
 

TYPE H/B POWDER-COATED STEEL TYPE H/B PLASTIC LAMINATE TYPE H/B STAINLESS STEEL
TYPE H/B SOLID PLASTIC