ASI Offers a variety of bathroom accessories to fulfill your applications needs.
 
Stainless Steel Bathroom Accessories

GENERAL SPECIFICATIONS:

    SERIES 7300 – SURFACE MOUNTED STAINLESS STEEL BATHROOM ACCESSORIES: Fabricated of type 304 stainless steel. Accessory posts are welded to a 2″ (50 mm) square flange and secured to a heavy gauge stainless steel mounting plate by means of a stainless steel set screw. Traditional, gap-free, easy to clean design. Specify Suffix “B” for bright polished or “S” for satin finish
    SERIES 7400 – RECESSED STAINLESS STEEL BATH ACCESSORIES: Shell and flange shall be drawn, one-piece seamless construction, 22 gauge type 304 stainless steel. If drywall installation is required, add suffix “D” to model number. If wetwall installation is required, add suffix “W”. Specify suffix “B” for bright polished finish or “S” for satin finish.

 

STAINLESS STEEL BATHROOM ACCESSORIES MODELS:

    Model 7335 – TOOTHBRUSH AND TUMBLER HOLDER: Similar to 7320 Soap Dish. Has 2-1/4″ (60 mm) diameter hole in center of unit to hold tumbler. Accommodates 6 toothbrushes. 4-1/4″ x 2″ (110 x 50 mm); projects 4″ (100 mm) from wall.
    Model 7320 – SOAP DISH: Drawn, One-piece soap dish welded to support arm and flange. Has two drain holes and two ridges to support bar of soap. 4-1/4″ (110 mm) wide, 2″ (50 mm) high; projects 4″ (100 mm) from wall.
    Model 7385 – TOWEL RING: For bath and hand towels. Ring is 4-1/2″ (115 mm) wide, made of 1/4″ (6 mm) diameter stainless steel bar. Projects 2-1/2″ (65 mm) from wall. 5″ (125 mm) high.
    Model 7301 – TOWEL PIN: Extends 3-1/2″ (90 mm) from wall
    Model 8425 – CLOTHES HOOK: Heavy duty 11 gauge type 304 stainless steel with satin finish. Hook projects 1-1/4″ (32 mm) from wall and is 2-1/4″ (55 mm) high.
    Model 7382 – HAT & COAT HOOK: Double hook for both coats and hats, 5-1/4″ x 3″ (135 x 75 mm) projection.
    Model 7310 – TOWEL SHELF WITH TOWEL BAR: 8″ (200 mm) deep consisting of four 3/8″ diameter stainless steel tubes, with 1/4″ (6 mm) diameter stainless steel towel bar below shelf, available 18″ (460 mm) and 24″ (610 mm). Overall height: 4-1/4″ (110 mm); projects 8″ (200 mm) from wall.
    Model 7355 – TOWEL BAR-ROUND: 3/4″ (19 mm) diameter stainless steel towel bar. Available in 18″, 24″ and 30″ (460, 610 & 760 mm) lengths. Extends 3-1/4″ (80 mm) from wall.
    Model 7360 – TOWEL BAR-SQUARE: 3-/4″ (19 mm) stainless steel towel bar. Available in 18″, 24″ and 30″ (460, 610 & 760 mm) lengths. Extends 3-1/4″ (80 mm) from wall.
    Model 7380 – STAINLESS STEEL SHELF: Available in 18″ and 24″ (460 & 610 mm) lengths. Shelf, 5″ (125 mm) wide, extends 6-1/8″ (155 mm) from wall. Edges are roll-formed for safety.
    Model 7340 – SINGLE ROBE HOOK: Hook extends 1-5/8″ (40 mm) wall.
    Model 7345 – DOUBLE ROBE HOOK: 4″ (100 mm) wide stainless steel bar forms hook at each end. Unit extends 1-5/8″ (40 mm) from wall.
    Model 7305-TOILET TISSUE HOLDER-SINGLE ROLL: Furnished with chrome-plated plastic rollers. Unit measures 2″ (50 mm) high, 7-3/4″ (200 mm) wide, projects 3-7/8″ (100 mm) from wall. Holds 1800 sheet standard core roll.
    Model 7305-2 – TOILET TISSUE HOLDER-DOUBLE: Similar to 7305, but for two 1800 sheet standard core rolls, 13-1/2″ (340 mm) wide.
    Model 7311 – TOWEL SHELF WITH TOWEL BAR: Heavy duty unit with 3/4″ and 3/8″ diameter type 304 stainless steel tubing. Bright finish only. Available 20″ (510 mm) and 24″ (610 mm). Overall height: 6-1/2″ (165 mm); projects 8″ (200 mm).
    Model 7404 – RECESSED SOAP DISH: Raised lip to retain soap. Overall size: 6-1/4″ x 6-1/4″ (160 x 160 mm).
    Model 7410 – RECESSED SOAP DISH & BAR: Same as 7404, but with 3/4″ bar. Overall size: 6-1/4″ x 6-1/4″ (160 x 160 mm).
    Model 7403 – EXTRA ROLL RECESSED TOILET TISSUE HOLDER: spring loaded chrome roller. Overall size: 6-1/4″ x 6-1/4″ (160 x 160 mm).
    Model 7402 – RECESSED TOILET TISSUE HOLDER: Spring loaded chrome roller. Overall size: 6-1/4″ x 6-1/4″ (160 x 160 mm).
    Model 74022 – DOUBLE TOILET TISSUE HOLDER: Overall size: 12-1/2″ x 6-1/4″ (320 x 160 mm). Wall Opening: 11-3/4″ x 5-1/4″ x 2″ (300 x 135 x 50 mm)
    Model 74022-H – DOUBLE TOILET TISSUE HOLDER: Same as 74022 but with hood.
    Model 74022-HSM – DOUBLE TOILET TISSUE HOLDER: Same as 74022-H but surface mounted.
    Model 74022-SM* – DOUBLE TOILET TISSUE HOLDER: Same as 74022 but surface mounted.
    Model 0398 – RECESSED HEAVY DUTY STAINLESS STEEL SOAP DISH & BAR: Type 304 stainless steel, exterior, bright polished finished; interior, sand blasted finish. Includes mounting clamp for stud walls. Overall size: 7-1/8″ x 5″ (180 x 130 mm) Wall Opening: 6-1/8″ W x 4-1/8″ H x 4″ D (155 W x 105 H x 100 D mm).
    Model 0399 – RECESSED HEAVY DUTY STAINLESS STEEL SOAP DISH & BAR: Similar to 0398, but with anchor lugs for embedding in cement.
    Model 0400 – RECESSED HEAVY DUTY STAINLESS STEEL SOAP DISH: Similar to 0398, but without bar.
    Model 0401 – RECESSED HEAVY DUTY STAINLESS STEEL SOAP DISH: Similar to 0400, but with anchor lugs for embedding in cement.
    Model 0258-SS – SURFACE MOUNTED FACIAL TISSUE DISPENSER: Cabinet type 304 stainless steel, satin finish. Dispenses 300 single or 150 two-ply sheets. Overall size: 10-15/16″ x 5″ x 2-1/8″ (260 x 125 x 55 mm).
    Model 0259-SS – RECESSED FACIAL TISSUE DISPENSER: Dispenses 300 single ply or 150 double-ply tissue. Faceplate type 304 stainless steel satin finish. Overall size: 11-11/16″ x 6-3/8″ (300 x 160 mm). Wall Opening: 11-3/18″ x 5-1/8″ x 2-1/8″ (290 x 130 x 60 mm).
    Model 0259-B – RECESSED FACIAL TISSUE DISPENSER: Same as 0259-SS, except faceplate is bright polished stainless steel. Wall Opening: 11-3/18″ x 5-1/8″ x 2-1/8″ (290 x 130 x 60 mm).
    Model 02594-B – RECESSED FACIAL TISSUE DISPENSER: Similar to 0259-B, but deeper, capacity 600 single sheet or 300 two ply sheets. Wall Opening: 11-3/8″ x 5-1/8″ x 4-1/8″ (290 x 130 x 105 mm).
    Model 02594-SS – RECESSED FACIAL TISSUE DISPENSER: Similar to 02594-B, but satin finish. Wall Opening: 11-3/8″ x 5-1/8″ x 4-1/8″ (290 x 130 x 105 mm).
    Model 0711-B – BOTTLE OPENER: One piece, 16 gauge type 304 stainless steel with bright finish. Projects 1-1/16″ (27 mm) from wall, 2″ (50 mm) wide x 2-1/4″ (55 mm) high.
    Model 0711 – BOTTLE OPENER: Same as 07111-B, except satin finish.
    Model 0712 – SURFACE MOUNTED RETRACTABLE CLOTHES LINE: Polished stainless steel unit has spring actuated 6 foot (150 mm) vinyl cord with white vinyl knob and locking nut to hold stretched line taut. Installs over bathtub or in shower.
    Model 0755-SS – HEAVY DUTY STAINLESS STEEL TOWEL BAR: Towel bar fabricated of 1″ (25 mm) O.D. x 20 gauge, type 304 stainless steel with a satin finish and designed not to turn in support posts. Support posts fabricated of heavy brass with satin finish to match stainless steel. Available in 18″, 24″, 30″ and 36″ (460, 610, 760 and 915 mm) lengths.
    Model 0707 – WASH CLOTH, BATH & HAND TOWEL HOLDER: Holds 3 sets of bath towels, hand towels and wash cloths 17″ high (430 mm). Unit is surface mounted and fabricated of 1/4″ (6 mm) diameter wire with a polished chrome finish.
    Model 0706 – WASH CLOTH, BATH & HAND TOWEL HOLDER: Holds 2 sets of bath towels, hand towels and wash cloths 11″ (280 mm) high.
    Model 0708 – WASH CLOTH, BATH & HAND TOWEL HOLDER: Holds 4 sets of bath towels, hand towels, and wash cloths 21″ high (535 mm).
    Model 0002-SM – STAINLESS STEEL SURFACE MOUNTED PAPER CUP DISPENSER: Dispenses 100 flat bottom cups. Adjustable for 3 oz. thru 6 oz. cups. Stainless steel with bright finish. Overall size: 3″ Dia. x 15″ (75 x 380 mm).
    Model 0002-ASM – STAINLESS STEEL SURFACE MOUNTED PAPER CUP DISPENSER: Similar to 0002-SM, but square design with swing down door, type 304 stainless steel, satin finish. Dispenses 3 oz. cups only.
    Model 0714 – COAT & BUMPER HOOK: Chrome-plated 3″ (75 mm) projection. Rubber bumper protects wall surface.
    Model 0719 – DOOR BUMPER: Chrome-plated 2-3/16″ (55 mm) dia. flange. Projects 1-7/8″ (50 mm).
    Model 0751 – HEAVY DUTY ROBE HOOK: Concealed mounting satin chrome-plated brass, 3-1/4″ (80 mm) projection.
    Model 0751-A – HEAVY DUTY ROBE HOOK: Similar to 0751, but exposed mounting, satin chrome-plated brass 3-1/4″ (80 mm) projection.

 
*For theft-resistant spindle, add R009 after model number
 
For more information please visit American Specialties Inc’s. Website
 

ZAMAC BATHROOM ACCESSORIES