Grab Bars - Jammer Doors

Commercial Products    

Grab Bars

 
American Specialties Inc. offers a variety of grab bars to suit each applications need.
 
Grab Bars

GENERAL SPECIFICATIONS:

  • In compliance with strength requirements of ADA guidelines
  • Bars fabricated of satin finish 18 gauge type 304 stainless steel tubing. Available peened or smooth
  • Mandrell bending process ensures uniform bar diameters
  • Heliarc welding forms a single structural unit

 

GRAB BAR CONFIGURATIONS:

The following standard shapes are typical configurations. Grab bars can be custom designed and manufactured to meet any specific architectural requirement.
 

Designers Note:

For a non-slip surface, specify suffix “P” (peened). When specifying grab bars insert the configuration type numbers listed below into the double zeros at the end of the grab bar series number.
 
Example 1: A 1-1/2″ (38 mm) concealed 18″ x 33″ (460 x 840 mm) horizontal grab bar has a model number – 3274. When a special size is needed add suffix “M” plus the size, to the closest standard bars.
 
Example 2: A 1-1/2″ (38 mm) concealed 23″ x 37″ (585 x 940 mm) horizontal grab bar has a model number 3274-M2337.
 

GRAB BAR MODELS:

  • Type – 02:
     A =  52″  1321 mm
     A =  54″  1372 mm
     A =  60″  1524 mm
     A =  72″  1829 mm
  • Type – 50:
     A =  24″  610 mm
     B =  36″  914 mm
  • Type – 56:
     A =  36″  914 mm
     B =  54″  1372 mm
  • Type – 57:
     A =  42″  1067 mm
     B =  54″  1372 mm
  • Type – 60:
     A =  18″  457 mm
     B =  30″  762 mm
  • Type – 62:
     A =  15-7/8″  403 mm
     B =  30-7/8″  784 mm
  • Type – 74:
     A =  18-1/8″  457 mm
     B =  33-1/8″  838 mm
  •  

  • 3400 Series – EXPOSED MOUNTING: 1-1/4″ (32 mm) O.D. Flange is 3″ (76 mm) diameter, 1/8″ (3 mm) thick type 304 stainless steel with a satin finish. Exposed mounting screw holes are drilled and countersunk.
  • 3500 Series – EXPOSED MOUNTING: 1-1/2″ (38 mm) O.D. Flange is 3″ (76 mm) diameter, 1/8″ (3 mm) thick type 304 stainless steel with a satin finish. Exposed mounting screw holes are drilled and countersunk.
  • 3700 Series – SNAP FLANGE: 1-1/4″ (32 mm) O.D. Cover snaps over mounting flange dimples to conceal screws. Concealed mounting flange is 3-1/8″ (79 mm) O.D. diameter with two screw holes and three locking dimples and is 1/8″ (3 mm) thick, type 304 stainless steel. Cover is type 304 stainless steel with satin finish, 22 gauge, 3-3/16″ (81 mm) diameter.
  • 3800 Series – SNAP FLANGE: 1-1/2″ (38 mm) O.D. Cover snaps over mounting flange dimples to conceal screws. Concealed mounting flange is 3-1/8″ (79 mm) O.D. diameter with two screw holes and three locking dimples and is 1/8″ (3 mm) thick, type 304 stainless steel. Cover is type 304 stainless steel with satin finish, 22 gauge, 3-3/16″ (81 mm) diameter.
  • Type 13 – 6″ x 10″ x 30″ (152 mm x 254 mm x 762 mm)
  • Type 15 – 30″ x 33″ (762 mm x 838 mm)
  • Type 24 – 52″ (1321 mm)
  • Type 33 – 5″ x 12″ x 30″ x 33″ (127 mm x 305 mm x 762 mm x 838 mm)
  • Type 34 – 18″ x 24″ x 24″ (457 mm x 610 mm x 610 mm)
  • Type 51 – 4″ x 12″ x 29″ (102 mm x 305 mm x 137 mm)
  • Type 54 – 30″ x 33″ (762 mm x 838 mm)
  • Type 75 – 6″ x 18″ x 27″ x 33″ (152 mm x 457 mm x 686 mm x 838 mm)
  •  
    For more information please visit American Specialties Inc.’s Website