Mirrors - Jammer Doors

Commercial Products    

Mirrors

Mirrors for every location, application and budget – virtually any size available
 
Angle Frame, Channel Frame, & Frameless Mirrors

GENERAL SPECIFICATIONS:

  • Angle Frame Mirrors – shall have a one piece, roll-formed, 18 gauge, type 304 stainless steel angle frame with corners heliarc welded, ground and polished smooth to a uniform satin finish. Select float glass mirror shall be guaranteed for 15 years against silver spoilage.
  • Channel Frame Mirrors – shall have a one piece roll-formed, 20 gauge, type 304 satin finish stainless steel channel frame with tightly mitered corners. Select float glass mirror shall be guaranteed for 15 years against silver spoilage.

 

FEATURES:

  • Mirror silver guaranteed for 15 years
  • Type 304 stainless steel angle and channel frame construction
  • Variety of reflective surfaces and well mountings
  • Many with shelves and tilting features

 

MIRROR MODELS:

  • Model 0535 – FIXED TILTED MIRROR: Offers visibility for wheelchair patients. Frame fabricated of 20 gauge stainless steel with a satin finish. Mirror is tapered from 4″ (102 mm) at top to 1″ (25 mm) at bottom.
  • Model 0537 – FIXED TILT MIRROR WITH SHELF: Same as 0535, but with shelf 6″ (152 mm) deep from wall.
  • Model 0600 – ANGLE FRAME MIRROR: 3/4″ x 5/8″ (19 x 16 mm) roll formed 18 gauge type 304 stainless steel angle has corners heliarc welded, ground and polished smooth to a uniform satin finish. Mirror is installed on a concealed hanging bracket that locks onto top and bottom of frame by tamper-proof set screws. Back plate is one piece, attached to frame with theft resistant locking device.
  • Model 0600T – ADJUSTABLE TILT MIRROR: Designed to provide easy visibility for wheelchair patients or return to upright position. Angle frame fabricated of 18 gauge stainless steel with corners welded and ground smooth. Tilts a full 6″ (152 mm) with bottom mounted on full width stainless steel piano hinge.
  • Model 0605 – STAINLESS STEEL ANGLE FRAME MIRROR WITH SHELF: Similar to 0600, but includes shelf of 18 gauge stainless steel with satin finish and all edges returned and hemmed for maximum rigidity and safety. Shelf is welded to face frame and is 5″ (127 mm) wide.
  • Model 0620 – CHANNEL FRAME MIRROR: 1/2″ x 1/2″ x 1/2″ (13 x 13 x 13 mm) 20 gauge type 304 satin finish stainless steel channel is a one piece roll formed member that encases mirror and backing revealing a tight mitered corner. Mirror is installed on two wall brackets and held secure by theft resistant screw.
  • Model 0625 – STAINLESS STEEL CHANNEL FRAME WITH SHELF: Similar to 0620, but with 18 gauge stainless steel shelf with satin finish and all edges returned and hemmed for maximum rigidity and safety. Shelf is welded to face frame and is 5″ (127 mm) wide.
  • Model 8026 – FRAMELESS STAINLESS STEEL MIRROR: Fabricated of 20 gauge type 304 stainless steel polished to a #8 mirror finish with a 1/4″ (6 mm) return. Provided with 1/4″ (6 mm) thick concealed tempered masonite backing and 4 mounting holes. Installer shall provide mounting screws to suit individual field conditions.

 

 Width x Height  0535  0537  0600  0600T  0605 0620  0625 8026
 16″ x 20″ (41 x 51 cm)      x   x x   x
 16″ x 24″ (41 x 61 cm)      x x  x x  x  x
 16″ x 30″ (41 x 76 cm)  x  x x  x    x    
 18″ x 24″ (46 x 61 cm)  x    x  x  x  x  x  x
 18″ x 30″ (46 x 76 cm)  x  x  x  x  x  x  x  x
 18″ x 36″ (46 x 91 cm)  x  x  x  x  x  x  x  
 20″ x 60″ (51 x 152 cm)      x  x    x    
 24″ x 24″ (61 x 61 cm)            x    
 24″ x 30″ (61 x 76 cm)  x    x  x  x  x  x  x
 24″ x 36″ (61 x 91 cm)  x    x  x  x  x  x  x
 24″ x 42″ (61 x 108 cm)      x    x    
 24″ x 48″ (61 x 122 cm)      x      x    
 24″ x 60″ (61 x 152 cm)      x      x    
 24″ x 72″ (61 x 183 cm)      x          
 30″ x 36″ (76 x 91 cm)      x      x    
 30″ x 48″ (76 x 122 cm)            x    
 36″ x 36″ (91 x 91 cm)      x    x  x    
 36″ x 48″ (91 x 122 cm)            x    
 48″ x 30″ (122 x 76 cm)      x    x  x    
 48″ x 36″ (122 x 91 cm)      x    x  x  x  
 60″ x 24″ (152 x 61 cm)      x    x  x    
 60″ x 36″ (152 x 91 cm)      x    x  x    
 72″ x 36″ (183 x 91 cm)      x    x  x    

 
Other Sizes available upon request.
 

OPTIONAL REFLECTIVE SURFACES:

Suffix Description:

  • B Tempered Glass – 1/4″ (6 mm) polished tempered glass.
  • C Stainless Steel Mirrors – Type 304 Stainless Steel polished to #8 mirror finish.
  • D Lexan Dura-Mir – Fabricated of 1/4″ (6 mm) polycarbonate sheet.
  • E Plexiglas – 1/4″ (6 mm) acrylic plastic, lightweight and shatter resistant.
  • L Laminated Glass – 1/4″ (6 mm) thick.

 

DESIGNERS NOTE:

All of the above glazing options are particularly suited to applications where frequent breakage and/or security problems exist. These surfaces are best specified for use in prisons, schools, police stations, psychiatric wards, etc. where shards of broken glass might possibly be used as weapons. The reflective quality of these types of mirrors is not as true as plate glass.
 
For more information please visit American Specialties Inc.’s Website